Arduino Wifi Shield CC3000

Clave: 13

Precio: $ 1,225.00 MXN*
Oferta: $ 579.00 MXN*
* Pesos Mexicanos

El mejor del mercado, comunicacion de alta velocidad SPI y muy facil de utilizar a diferencia de otros modelos Wifi.  Ya cuenta con una antena ceramica soldada a la placa, no es necesario poner una antena externa.

The CC3000 hits that sweet spot of usability, price and capability. It uses SPI for communication (not UART!) so you can push data as fast as you want or as slow as you want. It has a proper interrupt system with IRQ pin so you can have asynchronous connections. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP & AES. A built in TCP/IP stack with a "BSD socket" interface. TCP and UDP in both client and server mode, up to 4 concurrent sockets. It does not support "AP" mode, it can connect to an access point but it cannot be an access point.

We carefully wrapped this little silver module into an Arduino shield. We also added a microSD socket and a reset button. It has an onboard 3.3V regulator that can handle the 350mA peak current, and a level shifter to allow 3 or 5V logic level. The antenna layout is identical to TI's suggested layout and we're using the same components, trace arrangement, and antenna so the board maintains its FCC emitter compliance (you'll still need to perform FCC validation for a finished product, but the WiFi part is taken care of). Even though it's got an onboard antenna we were pretty surprised at the range, as good as a smartphone's.

* El kit incluye pines de conexion y headers hembra de expansion.


   Tutorial, ejemplos y libreria.
   Datasheet CC3000.
   CC3000 Wiki.


  • Alcance de 100 - 140 metros a campo abierto.
  • Max Dimensions: 68.61mm / 2.7" x 53.38mm / 2.1" x 2.87mm / 0.11"
  • Weight: 8.5g

Artículos relacionados

Comentarios y calificaciones: Arduino Wifi Shield CC3000