Productos

Formas de Pago:

Banamex

OXXO

Electrovalvula de Laton NPS 12V, 1/2″

!! AGOTADO !!   Pronto lo tendremos en Stock.

 

Una electroválvula es una válvula electromecánica, diseñada para controlar el paso de un fluido por un conducto o tubería. La válvula se mueve mediante una bobina solenoide. Generalmente no tiene más que dos posiciones: abierto y cerrado, o todo y nada. Las electroválvulas se usan en multitud de aplicaciones para controlar el flujo de todo tipo de fluidos.

* A diferencia de la electrovalvula de plastico, esta soporta temperaturas mas bajas y altas, ademas de mas presion y No necesita presion minima para funcionar.

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2″ (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can flow. Unlike the plastic solenoid valve, this one does not have a gasket, so there is no minimum pressure requirement.

We tried this solenoid at various DC voltages and found we could actuate it down at 6VDC (although it was a little slower to open). Here is the current draw table for various voltages:

Voltage    Current
     6V       1.6 A
     7V       1.86 A
     8V       2.0 A
     9V       2.3 A
     10V     2.5 A
     11V      2.7 A
     12V      3 A

*Nota:  Esta electrovalvula No es para grado alimenticio.

 

  • 1/2″ Nominal NPS
  • Working Liquid Pressure: 0 Mpa – 1.0 Mpa (140 PSI)
  • Working Temperature: -5ºC – 80 ºC
  • Actuating voltage: 12VDC (but we found it would work down to 6V)
  • Actuating life: ? 50 million cycles
  • Weight: 1.7lbs
  • Dimensions: 105mm tall x 55mm wide x 65mm long