PiTFT Kit - 480x320 3.5" TFT + Touchscreen for Raspberry Pi

Clave: 67

Precio: $ 1,700.00 MXN*
Oferta: $ 650.00 MXN*
* Pesos Mexicanos

Dale vida a tu Raspberry Pi con esta excelente pantalla LCD TFT, ahora mas GRANDE....  3.5" !    Ya no necesitas andar cargando con tu monitor, con este kit podras hacer portatil a tu sistema Pi.

Ahorra pines GPIO, solo utiliza al puerto SPI, todos los demas GPIO quedan libres.

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay so is slightly larger than our popular original PiTFT 2.8". The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

It's designed to fit nicely onto the Pi Model A or B but also works perfectly fine with the Model B+, Pi 2, Pi 3, Pi 3 B+ as long as you don't mind the PCB overhangs the USB ports by 5mm.

Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x13 header on the bottom, you can connect a standard Pi GPIO cable to it to use any of the other pins ask you like.

Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look.

We've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!

* Compatible con Raspberry Pi A/B/A+/B+/Pi 2/Pi 3/Pi 3 B+.

* NO incluye la tarjeta Raspberry Pi.


* La instalacion de los Drivers y Configuracion son necesarios para que el Display pueda funcionar, los drivers y configuracion solo funcionan en Raspbian.  Podras encontrar el tutorial paso a paso de manera detallada mas abajo.


   Tutorial y software PiTFT 3.5".


  • Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA.

Artículos relacionados

Comentarios y calificaciones: PiTFT Kit - 480x320 3.5" TFT + Touchscreen for Raspberry Pi